Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser
The innovative Ghost immobiliser will protect your car from key-long theft as well as relay theft. Your car won't be able to start in the event that someone doesn't have your PIN code.
It also comes with Transport Mode that allows you to disable the device temporarily which is ideal for transportation and servicing. It is then reactivated by entering a new PIN code.
There are no Key Fobs or Led Indicators
The Ghost 2 immobiliser is a innovation in automotive security technology and provides a solid defense against modern car theft techniques. Its undetectable installation and engine stop-blocking will reduce the risk of your vehicle being stolen, which can offer peace of mind, and may even reduce insurance premiums.
It is not detectable by scanners and cannot be hacked with common methods like key cloning or signal jamming. The device uses buttons on your vehicle, for instance those found on the steering wheel and door panels, to create a unique PIN code that can be changed. This sequence could last for up to 20 times. Only the vehicle owner is capable of starting the engine if the correct sequence or a beacon or mobile application is used. This adds an extra layer of protection against thieves.
You can also turn on an easy service mode when you need to perform tasks such as valet parking or servicing, which require you to temporarily disable your system. This can be accomplished quickly and easily via a mobile app, meaning your car remains secure whilst being repaired. When the work is done it is easy to switch back to secure mode. This ensures that your vehicle is secured throughout the day.
The Ghost 2 is far more convenient to use than other systems that require fobs. The app can be used as a backup key in emergency situations. This lets you drive while having your security off, without having to enter a PIN code.
No Radio Frequency Signals
The Ghost 2 immobiliser is not like other security systems which require an additional remote control. It can be controlled using the buttons that are already on your steering wheel or console. It's also undetectable by thieves who use RF scanning or code grabbing technology, which means your car won't even start for the device even if they get your keys.
The device makes use of an unique password sequence of buttons to lock the engine. This pin code is entered either on the app, or by using the buttons on the steering column or centre console. You can also lock the gearbox so that your car cannot be driven until you have your key or enter your pin code. The device can be set to Transport mode, which lets you drive your car without having to enter the PIN code and providing your vehicle with additional security when it's being used to valet or service parking.
The Ghost 2 immobiliser is designed to act as a deterrent to theft that is as subtle as possible, which makes it an appealing choice for those who've spent a lot of money on customising their vehicles or own very expensive or rare cars. Many have reported that this is a great way to protect their cars from theft and some have even shared stories of attempted thefts that were thwarted by the device. The Ghost 2 also offers a wide range of options, with customers reporting that it works with their regular keys to their car and also with their emergency button in their vehicle, which gives them peace of mind when they are away from their vehicle.
No Radio Frequency Scanners
Protect your vehicle from hacking, key cloning and theft by installing the Ghost immobiliser. The system uses the buttons on your vehicle, like those on your steering wheel and dashboard to create a unique, programmable sequence of buttons that only you can identify. Without this sequence, your vehicle will not start. The combination of a unique sequence of disarming and the absence of radio frequency signals makes the device extremely difficult to penetrate or bypass.
In contrast to Thatcham approved devices which depend on radio frequency scanning, the Ghost CAN Immobiliser is completely silent and doesn't require any external signals to perform its magic. It's a safer option and comes with insurance-approved status when it's installed by a TASSA approved installer (we're one of them! ).
It is highly recommended that you hire a professional installer install the Ghost immobiliser. This is due to how it integrates with the vehicle. This ensures that it is fully integrated with your vehicle systems, which results in optimal performance and a significantly reduced chance of failure.
Additionally, professional installation often includes warranties and support, further enhancing the value of your investment. This is a major deterrent to potential thieves who are less likely than before to try and bypass the device due to its numerous security features.
As well as an effective deterrent for thieves In addition to being a great deterrent against thieves, the Ghost is designed to be a user-friendly device too. It is able to automatically re-arm itself after a specific amount of time, which means you don't have to remember your PIN code each time you park your vehicle. It also offers the option of Service/Valet Mode in the event that you need to hand your vehicle over to service or valet parking. It can be enabled or disabled based on your preference using a simple indication sequence.
No Wire Cutting
The Ghost 2 is non-invasive and does not require any cutting of wires during installation. It connects to the vehicle's CAN data network and is programmed with a unique PIN that prevents anyone else from starting your engine if they don't have a personalised PIN sequence or app authorization.
It is also unnoticeable by the specialised scanning tools that some thieves use and is silent because it doesn't send out radio signals like other immobilisers. It is weatherproof, sealed, and small enough to be concealed in the vehicle.
Another added benefit of the Ghost II is that it can be switched to 'transport mode' for short durations without the need for an individual PIN sequence. This is great for situations such as lending the car to a family or friend member, or in a situation of emergency. You can start your vehicle quickly and securely.
It is important to work in a well-lit space when installing the Ghost II. You should wear safety gear when working with electrical components and tools. A basic set of hand tools will allow you to make precise connections, while a multimeter will help verify electrical values and ensure your wiring is safe. Cable ties and insulation tape can also be used to protect or join any cut or exposed wires during the installation process.
It's also important to disconnect the battery before trying any wiring work on your vehicle. This will stop any airbag deployments that happen accidentally or electrical shocks from occurring if the battery is disconnected while the Ghost II is still connected to the system of your vehicle.
Easy to Install
The Ghost immobiliser, a unique device from the next generation, operates by connecting directly to your vehicle's CAN Data Network. It uses a personalised pin code to prevent it from getting started. ghost 2 immobiliser cost makes it much more difficult to break than standard alarm systems or aftermarket key fobs and offers superior protection against key cloning hacking and relay attacks.
ghost 11 immobiliser can be hidden in your vehicle, and it utilizes the buttons on the dashboard and your steering wheel to create a unique sequence you can only recognize. This blocks thieves from being able make use of a key that is cloned to start your vehicle. It can also stop them from using the diagnostic tool that is based on hacking the OBD.
Installation is simple and does not require cutting wires. The unit is connected to the vehicle's CAN bus through a constant 12V supply identified and a grounding connector. A multimeter is required in order to determine the right wires. Hand tools of a basic nature will suffice for the installation. Insulation tape or heat shrink tubing is recommended to shield the connections and cable ties can be utilized to keep the wiring neat and organized.
After installation, the unit goes into a learning mode that records your specific buttons or sequences in order to create your unique pin code. The information is saved in the CAN network, making it nearly impossible for anyone else to duplicate your sequence and start your vehicle.
Transport Mode is a function that can be utilized in the event of an emergency, such as if you forget your PIN number, sell your vehicle or the button stops working. This will disable the Ghost system completely, but will reactivate automatically when you reach 31mph for more than 15 minutes or when you enter your PIN Code. This is perfect for those who rent their vehicles frequently through services like Turo or ZipCar.